Archive for the 'Bell Canoes' Category

How to get into a Canoe

How to get into a Canoe
by Red Rock Wilderness StoreWith a Souris River Canoe, you really don’t have
to get your feet wet - EVER!

Please Note: This loading technique will work well for all canoes. However, while Souris River Canoes, along with royalex, polyethylene, and aluminum canoes, can handle this sort of entry repeatedly, we do not recommend it for Wenonahs, Bells, Mad River, Sawyer, Novacraft and other brands of cloth-layup, vinylester or polyester resin canoes. Canoes with made this resin tend to require more delicate handling than epoxy resin canoes especially when they get older because vinylester resin gets brittle with age. Repeatedly sitting on these canoes may adversely affect their bows and sterns. Due to their more fragile nature, you may want to check with the manufacturer to see if the canoe is strong enough to accept this means of entry instead of the usual “wet-foot” technique currently used on vinylester resin hulls. We wouldn’t want you break something. For the rest of you epoxy/kevlar canoe owners, get in and go!

Addendum:  I’ve run into a bunch of people (”experts” and “expert” outfitters both)  who’ve commented on the photos below, saying that the Boundary Waters rarely has such a nice smooth beach on which to land a canoe.  No kidding - I could have paddled over to Moose Lake to find a rockier portage but I kinda figured that most readers could “pretend” there are rocks alongside the canoe in the pictures.  The maneuver remains the same whether there is a rough portage or not.  What has happened to the abstract thinkers of the world today and how do some of these “experts” rate the self-proclaimed title?  Sheesh!

Visit Red Rock Store for a great series of pictures:

How to get into a Canoe without getting your feet wet!

Sphere: Related Content

Compare Kevlar Canoes

Here: You can do a quick comparison to see if you think Brand X’s new hull is actually “apples for apples” or the more ordinary “apples for oranges”.
Souris River Quetico 17 features: Brand X’s new “apples for apples with Souris River” canoe hull features
Epoxy Resin - Heat cured, strong, flexible forever, and doesn’t like to let go of kevlar fibers under stress. Easy to make a lasting repair because cured epoxy resin does not change significantly with age. Vinylester Resin - room cured, gets brittle with age, only encapsulates kevlar fibers-doesn’t bond nearly the same as epoxy and wait’ll you get to make a repair! Repairing Brand X
Full Sheet Construction - all 4 layers of kevlar and other layers are complete sheets - no splices to fall apart under stress - and if you actually use your canoe, there will be stress. Partial sheet construction - 2 layers in sides, three in the bottom, splices of kevlar hidden in the sides of the canoe - sounds really “apples for apples” doesn’t it?
Unique Flexible Rib System for floor stiffening - only effective and achievable with epoxy resin -designed (and immensely-proven) to hold up in the brutal, rock laden Boundary Waters - (Go ahead and ask Brand X canoe outfitters how those foam core kevlar canoes are working out for them in rentals!) Foam Core Floor Stiffener - holds the bottom rigid. Doesn’t budge one bit, crushes on the rocks, leaves grooves and cracks in the kevlar, not easy to fix, and breaks along the chines, rivets pull out of the styrofoam, a “joy” to fix! But hey - that’s the way it’s always been done. No oven time makes these canoes fast to build and sensibly profitable for the builder.
Integrated skid plates already installed on every Souris River Canoe. No extra dinking around. No Skid Plates but for another $75 - $125 you can hire someone to install big fat ones on your canoe and add another 4 lbs. of weight plus don’t forget the snappy, sleak appearance afterwards! Don’t want skid plates? There’s always multiple layers of silver duct tape - believe me, I’ve seen it many, many times.
Brass Grommeted Tie Down Holes in bow and stern for convenience and function. Do-Diddly here - tie to the grab handles or wherever.
Extruded Aluminum Gunwales - one smooth piece, no scoring and folding Folded, formed, scored gunwales can crack with use along score lines.
Heavier Duty Aluminum Parts - Who are they kidding anyway? America is not getting thinner. Light gauge aluminum everything because saving a pound for racing is everything! I never see too many big dudes in races, but the Brand X marketing team must really know and understand their canoe market - hence the attempt to copy the hull of the Souris River Quetico 17. And the canoe building experts are…who?
Le Tigre Kevlar - Looks great, unique, refinishes well and fades evenly Boring Skin Coat Butterscotch kevlar because it’s cheaper.
Woven Color - doesn’t add weight and you can’t scratch it off on the rocks, refinishes pretty nicely as well. Plus, it’s transparent enough that you can see how the canoe was built. Gel coating hides splices, little pieces added here and there, etc. Gel Coat - a good old fashioned technique that adds 6-8 lbs. of weight, scratches off on the rocks, cracks off on the rocks, needs repair, needs delicate handing, does not accept impacts without cracking like a pane of glass. It does look really pretty in the showroom and hides a ton of questionable workmanship underneath, plus it impresses that particular customer who doesn’t research anything.
Skid-ability - All SR’s slide over rocks with the final layer of fiberglass serving as a protective layer that WILL slide over rocks.. Souris River knows that fiberglass will slide over rocks and resists getting stuck. Straight kevlar gets caught and torn up. Stick-ability - all skin coat Brand X canoes can (and many do) get torn up as they slide over rocks with a load. Those kevlar fiber bundles that make up the cloth grind tot a screeching halt on rocks causing meaningful damage. Don’t believe me? Go hang around at Boundary Waters public landings and look at the outfitter canoes - look for sloppy patches, cuts and cracks. Or visit this page here to see what a foam core looks like after it slides over a rock.
Wet Foot Canoeing - unneccesary in a Souris River. Just use a little common sense that would be applied to all canoes and canoeing. Don’t ram shore at 30 MPH in attempt to make the portage 18 ” shorter. Don’t step in the canoe until it’s entirely floating on water and not resting on a rock. Don’t lever the canoe over beaver dams when fully loaded, et al. These same conmon sense rules which have applied to aluminum and royalex canoes since the dawn of time. In looking at our rental canoes, I’m pretty sure these rules are not always followed, but you can at least make an effort. Wet Foot Canoeing - definitely a must in Brand X if you want to own the canoe past your first trip in the Boundary Waters. But that’s OK, some people like soft toenails. Crossing portages with soft toenails and Teva sandals means greater flexibliity in all those gnarly rocks. Less pain and damage to the toes. Ironically, this is much like Souris River’s ability to flex over rocks and survive rugged conditions thereby reducing the need for sandals and soft toenails afterall. It’s a true paradox.
Handling on water - absolutely outstanding canoe on the water! Stable, user friendly, tracks, turns and handles big water while fully loaded or empty, like a champ. Handling on water - finally, Brand X should now actually have an outstanding canoe on the water. Up until now, everything else they’ve made has been kinda crappy, unforgiving, and less fun for regular folks who aren’t racing or interested in racing. I’m glad they finally stole all the design help they’ve needed for all these years. Says a lot about Souris River’s design work, eh?
So what did you come up with? I’m thinking that Brand X has a canoe that is “apples for apples the same” as Souris River’s famous Quetico 17 except for all those differences. I’m also a “vegetarian” but I do like beef, and chicken, and pork …Yeah, definitely the same canoe. - JB -

CALL FOR CANOE SHIPPING QUOTE 1-800-280-1078

Sphere: Related Content

Kevlar Canoe Warning

 Red Rock Store issues the following warning:

Be on the lookout, folks! Desperate sales people of Brand X kevlar canoes (all made with vinylester resin - don’t forget that fact) are offering their new hull as being the same canoe as a Souris River Quetico 17. One of my biggest Boundary Waters outfitters, after extensive paddling in real conditions has declared Brand X’s “supposedly-the-same-as-a-Quetico 17-canoe” a “dog” in the water compared to a Souris River Quetico 17. It’s a typical Brand X in poorly fitting sheep’s clothing - narrow front end, no room for your feet, sluggish with a load, doesn’t handle rough water as well, etc. And, now, we’re hearing the SAME CRAP about epoxy degredation by the usual Brand X sales suspects.

They simply can’t beat a Souris River Quetico 17, they know it and this is how they play ball. Read my Baloney Vortex for all your questions answered regarding the lame accusations made by the panicking Brand X sales people for details concerning epoxy resin and Souris River Canoes.

Sphere: Related Content

Canoeing Video For Canoecopia Lovers!

If you wanted to attend the Canoecopia canoe trade show but can’t, check out the links to the canoeing video posted below.  

This video makes you feel like you are on a canoe trip!
 

YouTube, Metacafe, Google, DailyMotion, Crackle, Stupid Videos, Sclipo and Viddler

kayak trade show, paddlesport, paddle sport, canoe expo, 2008 sport shows,

Compare Canoe Manufacturers. 

  • Souris River
  • Bell Canoe
  • Old Town Canoes
  • Novacraft Canoes
  • Wenohnah Canoes

Canoeing Video For Canoecopia Lovers!

Sphere: Related Content

Hot Day for Kevlar Canoes!

It’s a cold day in Canada - but a hot day for deals on Kevlar Canoes!

Ted here.  I added another log to the fire, made myself a cup of green tea and pulled out the list of Boat, Sport and Trade shows going on this weekend

Wow - what a line up!  Looks like I will be virtually jumping all over the United States this weekend!

This moring I’ll browse the Sport Show exhibitor lists - primarily in search of Kevlar Canoe Manufacturers with a booth or display - but I’m also on the lookout for unique fun and entertainment stations, seminars or events and activites at each Show.  Aside from the amazing new boats and motors, sailboats, kayaks, and range of powered personal watercraft, I always find that the most memorable part of the Sport Show is always something fun - like The Water Skiing Squirrel or Cabella’s Hunting Simulator at the All Canada Shows.

Learn more about the various
Types of Kevlar Canoes
before you start shopping!

Here’s the List of Boat Shows (Jan 18-20) I’ll be Virtually wandering through… I’ll meet you back here in a few hours and show you some of the brochures I picked up…  Then I plan to go back to the best parts and do an individual hightlight on what I see.

I have my sunglasses, my hawaiian shirt and my camera around my neck… where’s my hat?  There we go… my baseball/fishing cap. (and I’m going to leave these clip-on LED lights under the brim of my hat too)

Sphere: Related Content